156 Tail Lights

Started by krysRAW = AROCA-Vic PR =, March 19, 2014, 06:58:25 AM

Previous topic - Next topic

krysRAW = AROCA-Vic PR =


Hi guys

I'm wanting to get some after market tail lights for my 2004 Facelift 156 2.0L JTS:
http://www.1-caraccessories.com/en/54-alfa-romeo-156-black-lexus-taillights-2002.html

I know are a few different series of the 156 over a span of a few years and you can tell by the different designs of the front end, but I was wondering if anyone can indicate if there were changes to the tail light fittings between the different years/series?

Or do they all fit the same tail light unit?
2004 156 JTS 2.0 5-Spd Manual

MODS:
Tint
Stance SC7 19x8.5 Rims
Custom Sport Exhaust
Custom 90mm Cold Air Intake
SAAS Pod Filter
Wheel guards Rolled & Pumped
BC Adjustable BR(RS) coilovers
Front Tower Strut Brace
3" intake pipe

Craig_m67

The facelift (exterior) revision around '03 changed both the front and rear ends.
At the rear the tail lights which flick up (..../) now flick down (...\)
You will need new tail lamps and boot/tailgate to fit correctly

Your choice of rear lamps are hideous
'66 Duetto (lacework of doom)
'73 1600 GT Junior (ensconced)
'03 156 1.9JTD Sportwagon (daily driver)

krysRAW = AROCA-Vic PR =

Thanks for the details Craig.

And your opinion on my choice is also duly noted.
2004 156 JTS 2.0 5-Spd Manual

MODS:
Tint
Stance SC7 19x8.5 Rims
Custom Sport Exhaust
Custom 90mm Cold Air Intake
SAAS Pod Filter
Wheel guards Rolled & Pumped
BC Adjustable BR(RS) coilovers
Front Tower Strut Brace
3" intake pipe

krysRAW = AROCA-Vic PR =

Quote from: Craig_m67 on March 19, 2014, 10:36:46 AM
Your choice of rear lamps are hideous

I personally didn't think that my choice of tail lights was overly abbrasive in appearance:


I guess each to their own, right Craig?
2004 156 JTS 2.0 5-Spd Manual

MODS:
Tint
Stance SC7 19x8.5 Rims
Custom Sport Exhaust
Custom 90mm Cold Air Intake
SAAS Pod Filter
Wheel guards Rolled & Pumped
BC Adjustable BR(RS) coilovers
Front Tower Strut Brace
3" intake pipe

Cool Jesus

Its all subjective, I like them. I was toying with the same idea (black lexus style) for my daughters 147 which is slowly being pimped up  ;D
Present:
* '76 Alfetta GTAm 2.0 (project)
* '03 147 2.0 TS
*'12 159 Ti 1750 TBi
===================
Past:
* '10 159 2.2 JTS
* '89 164 3.0
* '98 Spider 2.0 TS

krysRAW = AROCA-Vic PR =

2004 156 JTS 2.0 5-Spd Manual

MODS:
Tint
Stance SC7 19x8.5 Rims
Custom Sport Exhaust
Custom 90mm Cold Air Intake
SAAS Pod Filter
Wheel guards Rolled & Pumped
BC Adjustable BR(RS) coilovers
Front Tower Strut Brace
3" intake pipe

shiny_car

I think they're pretty hideous.  ;D ::)

However, since the arrival of the 159 (many years ago of course), they are less hideous than before, because they are a little similar in design.

Still, I wouldn't put them on a 156. Too 'try hard', by trying to make the car different for the sake of it.  :P

Ha, yeah yeah, each to their own!  :-X 8)
Giulietta QV TCT . 1.75 TBi . Magnesio Grey - Black
GT . 3.2 V6 . Q2 . Kyalami Black - Red
75 . 3.0 V6 . Alfa Red - Grey

Craig_m67

Quote from: krysRAW on March 19, 2014, 01:46:25 PM

I guess each to their own, right Craig?

Absolutely!!
( they're still hideous :) )
'66 Duetto (lacework of doom)
'73 1600 GT Junior (ensconced)
'03 156 1.9JTD Sportwagon (daily driver)

krysRAW = AROCA-Vic PR =

Quote from: Craig_m67 on March 19, 2014, 06:38:16 PM
Quote from: krysRAW on March 19, 2014, 01:46:25 PM

I guess each to their own, right Craig?

Absolutely!!
( they're still hideous :) )

LOL! Smart ass  ;)
2004 156 JTS 2.0 5-Spd Manual

MODS:
Tint
Stance SC7 19x8.5 Rims
Custom Sport Exhaust
Custom 90mm Cold Air Intake
SAAS Pod Filter
Wheel guards Rolled & Pumped
BC Adjustable BR(RS) coilovers
Front Tower Strut Brace
3" intake pipe

AndrewR

Do the make them for a update 166? ;D
2006-166 Ti

colcol

This subject 'Bling Tail Lights' for Alfa Romeo, is being posted in the wrong column, it should be in 'Off Topic', - 'Stupid Car Accesories', this is one of the better subjects, its good that you gave it a kick along, as we were running out of things to laugh at, Colin.
1974 VW Passat [ist car] 1984 Alfa 33TI [daily driver] 2002 Alfa 156 JTS [daily driver]

krysRAW = AROCA-Vic PR =

Quote from: AndrewR on March 19, 2014, 09:12:58 PM
Do the make them for a update 166? ;D

Couldn't find anything for the 166 AndrewR  :-\
2004 156 JTS 2.0 5-Spd Manual

MODS:
Tint
Stance SC7 19x8.5 Rims
Custom Sport Exhaust
Custom 90mm Cold Air Intake
SAAS Pod Filter
Wheel guards Rolled & Pumped
BC Adjustable BR(RS) coilovers
Front Tower Strut Brace
3" intake pipe

krysRAW = AROCA-Vic PR =

Quote from: colcol on March 19, 2014, 10:00:39 PM
This subject 'Bling Tail Lights' for Alfa Romeo, is being posted in the wrong column, it should be in 'Off Topic', - 'Stupid Car Accesories', this is one of the better subjects, its good that you gave it a kick along, as we were running out of things to laugh at, Colin.

::) Hahahahahaha! Well I'm glad that I've got the laughs going!

This idea is back on the drawing board any guys, as I realise my series 156 has the 'down turn' angle in the middle and I have to see an aftermarket version for this design.

I was really just trying to find something that was a little more clean cut than the standard red tail lights. I recently had new satin black rims fitted on and I thought the black housing on the tail lights would tie in better than the standard red tail lights.

It's not even the colour so much that's an issue, more the plastic hazed out look of the tail lights. I would even be happy to keep the red look if the fittings looked more crystal than hazed out:


Might need to look into some DIY options. Anyone come across any good tail light DIY's?
2004 156 JTS 2.0 5-Spd Manual

MODS:
Tint
Stance SC7 19x8.5 Rims
Custom Sport Exhaust
Custom 90mm Cold Air Intake
SAAS Pod Filter
Wheel guards Rolled & Pumped
BC Adjustable BR(RS) coilovers
Front Tower Strut Brace
3" intake pipe