how to remove

[kartone]

how do you remove the front grille badge on a 1980 alfetta gtv?  Is it glued, screwed or snapped-on?

[Neil Choi]

It is glued or double sided taped depending who did it before you. 

Just pry gently with small screw driver.  Interestingly it hides the screw who holds the heart to the body.

[Cool Jesus]

The badge was originally pressed into place with some plastic/nylon grommets on the two locating lugs, but there's every chance that it has since been glued/siliconed into place by previous owners. Either way, just carefully pry it off to access the securing screw for the centre alfa V grill behind the badge.

[kartone]

with a mirror located the pin with the original plastic grommets, thanks for the advice, now will gingerly pry-off with small screw driver

[Evan Bottcher]

If the badge is stuffed, I tend to drill a hole in the front of the badge so I can lever firmly with a screwdriver.

[kartone]

Done it! The badge was FIRMLY affixed with the original factory mastic silicone.
Instead of wedging it off from the front, I pushed it off from the rear using the two through holes located just below the two locating pins. 

[Cool Jesus]

Wow, still original is a good sign of no decent front end damage