15 inch rims with 4 x 98pcd

[hammer]

Does anyone out there (preferably in Qld) have a set of 15 inch rims with a 4 x 98pcd stud pattern that they are willing to part with for something less than a king's ransom? The internal diameter of the rim also needs to be as close to a minimum of 370mm as possible. I know I am pushing the friendship now, but I am going to use them as race rims so the lighter they are the better.

Thanks folks,

Brent

[acresci]

Hi,

I've just joined the website and noticed your request for some rims. Are you still looking ? If so, I have 4x 15" wire type wheels that were on a 105 (which i think has a 98PCD). I'm in SA.

Adrian

[Fast Eddie]

Sorry to dissapoint you but 105 wheels are not 4x98 so wont fit.

[hammer]

Thanks guys. I ended up grabbing a set from Newcastle.

Cheers,

Brent

[John A Pucak]

Hi Hammer, if you need a spare set of 15x6.5 lightweight alloys , I have them sitting in my garage with worn yoko 32rs. I used to use them for supersprints on my Alfetta GT. They are Velox Star pattern alloys, they can clear V6 brakes( woops did I say that) and are the 4x98pcd in perfect condition for $400
Cheers Hollywood

[hammer]

Hollywood,

Thanks very much for the offer. I am actually using the spacers that Jim Nielsen had made for the Guilietta, that convert the PCD from 4X 98 to 4 x 114.3. So believe it or not I am currently running a set of 15 x 7 wheels that I bought from a young drift racer that he used to run on a Toyota.

Thanks again for the offer and congrats on your efforts at the East Coast Challenge. Hope to see you at Lakeside next year for round three.

Cheers,

Brent