164 Jacking Points

Started by V AR 164, February 21, 2015, 01:52:57 PM

Previous topic - Next topic

V AR 164

Hey again,

Would like to jack the rear of my car up to allow for more room to remove the rear bumper.

Not sure where to do this. I have attached a picture and I believe you can jack the car up from the centre of the rear axle support brace. (Just under the abs module)

I just want to make sure before I jack the car up so I don't buckle the rear chassis.

Thanks, Andrew.
Present:
-1992 164Q
-1993 Hilux Surf

Past:
-2006 159 2.4 Ti

VeeSix

The correct point for jacking the rear of the 164 is at the very back centre, you will see a little unit that has three holes in it  :)
1985 Alfa Romeo GTV6 V6 2.5 12V 
1986 Alfa Romeo 90 V6 2.5 12V
1990 Alfa Romeo 75 V6 3.0 12V Potenziata
1990 Alfa Romeo 164 V6 3.0 12V Zender
1991 Alfa Romeo 164 V6 3.0 12V QV
1992 Alfa Romeo 164 V6 3.0 12V QV