FS: Alfetta seats and spare headrests

Started by julianB, January 22, 2016, 11:58:42 AM

Previous topic - Next topic

julianB

Quite reasonable condition, velour has only a few little tears on it and they are on the rear. Foam feels reasonable. Surface rust on the frame hinges. The car is going to have buckets, so these aren't required.
$400 the lot, pick up, Eastern Suburbs Sydney. Unfortunately, I won't separate.
85 GTV6 "Juliet"
GTA conversion-
AHM ITB setup, Jim K manifolds & 10.3 cams, M84
17" Work Meister S1R
330mm Brembo front, vented rears
RS coilovers and bits
Recaro LX mesh headrest buckets

'68 step nose Junior "Romeo"
bare metal project

julianB

more.
i have more photos, and I'm happy to email them to any interested buyer.

Cheers
85 GTV6 "Juliet"
GTA conversion-
AHM ITB setup, Jim K manifolds & 10.3 cams, M84
17" Work Meister S1R
330mm Brembo front, vented rears
RS coilovers and bits
Recaro LX mesh headrest buckets

'68 step nose Junior "Romeo"
bare metal project

julianB

85 GTV6 "Juliet"
GTA conversion-
AHM ITB setup, Jim K manifolds & 10.3 cams, M84
17" Work Meister S1R
330mm Brembo front, vented rears
RS coilovers and bits
Recaro LX mesh headrest buckets

'68 step nose Junior "Romeo"
bare metal project

julianB

Thanks to Rob Panetta, I know now that these are actually early Alfettas seats- I had assumed they were 105 seats as they came with my Step nose project!

Price drop still applies. I need to create some space for my next round of mods to the GTV6
85 GTV6 "Juliet"
GTA conversion-
AHM ITB setup, Jim K manifolds & 10.3 cams, M84
17" Work Meister S1R
330mm Brembo front, vented rears
RS coilovers and bits
Recaro LX mesh headrest buckets

'68 step nose Junior "Romeo"
bare metal project