Wheel nuts for Ronal A1's

[GTVeloce]

I have recently fitted some Ronal A1's to the car but the existing wheel nuts do not fit properly. The fitter suggested I source some better suited ones and I can see why. Where the flaired end meets the tapered section is being ground down by the wheel. Not a great thing...

I have not been very successful in finding some locally in Melbourne. I found the sort of replacement I am looking for in the UK but would prefer to buy locally if possible.
http://www.ebspares.co.uk/parts/EB8/EB8708.cfm
Does anyone know where I can find these or very similar? Thanks

[Darryl]

I needed some tapered wheel nuts in a difficult size for some alloys - after much being stuffed about by Supercheap and Repco I ended up going to a decent tyre and wheel place and told them what I wanted, they had to order them in but didn't charge much and got the right parts - and threw them on the car for me gratis (slow arvo..).

[four90s]

When I worked at Sprint Auto Parts here in SA, we had a big catalogue with a huge range of wheel nuts and studs in it.

I think, as well as the suggestion of the local tyre place, a good independent spare parts place should be able to get them for you. They should probably still have the same or similar catalogue.

Cheers
Steve
Adelaide

[LaStregaNera]

Go to bursons, they deal with "Nice Products" - they'll have the nuts you need in the catalog.

[GTVeloce]

I had tried Burson's as well as Repco Cheap Auto. No one had the 'bulge' style I needed. I had also tried a few tyre 'specialists' like Bridgestone (where I had bought the tyres to go with them and Bob Jane. A tip off from a board member led me to an independent wheel shop who directed me to Mr Lugnut - http://www.mrlugnut.com.au/lugnuts.html

I have placed an order so will report when I have them installed.