Formal introduction

Started by neph, April 23, 2016, 11:04:22 PM

Previous topic - Next topic

neph

My first post about 2-3 months ago in SA section about servicing, but since then joined and went to the Glenelg Show and Shine event.

I purchased my 156 2003 2.0 JTS Selespeed about 4months ago, but kinda jumped into the deep end since was the first performance euro car.
Was pretty stoked at getting the car, owner barely drove it over the 13 years (87k) and had major engine work on a few years ago costing around 5,000.
Its now my pride and joy, was very lucky to chat to someone at the event who gave me some hints and advice. New badges, cleaning up lights and a few little things I shall get done in next few weeks. I hope to learn a lot on here too.

Pics are at Glenelg event and outside work.

My first post about 2-3 months ago in SA section about servicing, but since then Joined and went to the Glenelg Show and Shine event.

I purchased my 156 2003 2.0 JTS Selespeed about 4months ago, but kinda jumped into the deep end since was the first performance euro car.
Was pretty stoked at getting the car, owner barely drove it over the 13 years (87k) and had major engine work on a few years ago costing around 5,000.
Its now my pride and joy, was very lucky to chat to someone at the event who gave me some hints and advice. New badges, cleaning up lights and a few little things I shall get done in next few weeks. I hope to learn a lot on here too.

Pics are at Glenelg event and outside work.

Quote