Clutch pedal return spring

Started by Bourney, September 11, 2016, 09:40:15 PM

Previous topic - Next topic

Bourney

Hi, is anyone able to put up a photo to show how the clutch pedal return spring is attached to the car?

Thanks David
________________________
83 Alfasud Ti QV (restored project car)
12 Renault Clio RS 200 Cup

Alfa.mg

Hi David, youve probably already worked it out but i tried to take some photos of mine i just put back together. It was really hard to take a good photo under there.
1983 alfasud TI 1.5 silver
1990 Alfa 33 cloverleaf 1.7 white
2001 Alfa 156 2.0 red
2003 Alfa 147 2.0 red
2001 Alfa 156 2.5 Monza silver (now)
1983 Alfa Sud TI 1.5 red (now)
1974 berlina 2000 white (1 too many)

Alfa.mg

And the good photos are too big to post. The spring goes from the pin that attaches the clutch master to the pedal, on the inner side, and is stretched to the top lip of the steering column mount. There is a little indent in it that the spring sits in. At least thats how mine went back together!
1983 alfasud TI 1.5 silver
1990 Alfa 33 cloverleaf 1.7 white
2001 Alfa 156 2.0 red
2003 Alfa 147 2.0 red
2001 Alfa 156 2.5 Monza silver (now)
1983 Alfa Sud TI 1.5 red (now)
1974 berlina 2000 white (1 too many)

Bourney

Thanks for the pic and the description. I will pm you my email address because those high res pictures might come in handy tomorrow.
Regards David
________________________
83 Alfasud Ti QV (restored project car)
12 Renault Clio RS 200 Cup