3.0 12v 164 engine

[Sheldon McIntosh]

As stated, selling a 3.0 engine from a 164. Comes with everything, including wiring loom.  I drove the 164 it came out of, the engine was good and strong, about 200k km on it.  It's been sitting for a few years, so will obviously need new belts and oil and whatnot.

Looking for $500, but needs to be gone this week.  Bring your own engine crane, or two VERY strong men.

As an aside, a post on the BB from the day I took out the engine.  Amazing what you can do in one day when you have access to a demo-saw and a fork-lift.....   http://www.alfabb.com/bb/forums/164-168-1991-1995/201462-164-convertible.html

[Sheldon McIntosh]

Bumping this up, $300 for the engine if you can pick it up this weekend.

I also have a 2.5 V6 for free a slab of Coopers Pale Ale; ran fine (but a bit smokey) when I took it out of my 90 six years ago, but would need rebuild since I had the cam-covers off when I had it on the garage and accidentally got some dirt and grit in it.   Good for parts or experimenting on.