Local supplier of 105 panels required.

[alfagtv100 (Biggus)]

Hi all,

Could someone please help with recommendations for local panel suppliers?
Burwood Panelworks are ready to start the repairs to my 105 but are struggling with a lack of response from the supplier they are trying to source parts from.  I wont mention who, as they are a club sponsor.
I have provided details for the usual UK sources but need a reliable local option, providing quality replacement panels.
Thanks in advance for any help you can provide.

Cheers,

Marco.

[John A Pucak]

Have you tried Rob at Manning Motors his number is 02 99392069
Good Luck

[Davidm1600]

Hi Marco

Which panels are you after? I assume you are referring to the rear ones (LHS guard, rear valance and bootlid as a result of the shunt you had, if I recall correctly ??  The only local people I am aware of are as I recall both club sponsors, and both located in Melbourne.  I was similarly thinking of checking them out for a boot lid and doors as mine are all rusty and probably beyond repair.

If you are not having any luck with these I seriously would consider using the UK as your best option.  These obviously include Classic Alfa, Alfaholics, Highwood and EB spares.  From my experience so far, having made a comparison with many of the parts I need for my Super and GTV, I have found Classic Alfa (Richard Norris) to be slightly cheaper than the other suppliers.  Parts from the UK seem only to take about 1 week to arrive.  Good luck with the hunt for parts.  Cheers Dave

[alfagtv100 (Biggus)]

Thanks John and David,
The supplier contacted Burwood Panelworks this morning.  The order has been placed, so things seem back on track.
Cheers,
Marco.

[Tim Jobson]

Hi Guys,

I am after panels too, can you let us know Burwood Panelworks number or email

Thanks Tim

[Brad M]

Tim,
Burwood panels were just piecing together Marco's 105 (in a very fine fashion), there don't have 105 panels hanging about. Marco's post was just saying Burwood panels were contacting a third party to source the required panels and there was a little delay. Correct me if I'm wrong Marco.
Check our sponsors page, some of those chaps may be able to assist you.
Brad