Issues with 147 TS

Started by alfaowner251292, June 20, 2017, 07:38:51 AM

Previous topic - Next topic

alfaowner251292

hello everyone,

Here is the issue im having, any advise would be great.
2003 alfa twin spark 2.0L petrol automatic

has check engine light on.
when erase codes light comes back on within seconds.
code causing light p0100 ( air flow meter )
other codes ( all related to o2 sensors )
MAF tested and working perfectly.
wiring all fine.
o2 sensors showing 0 ( nothing ) when car is on.
brand new crank sensor, sparks, all filters, gaskets, maf sensor

local mechanic didnt know much i dont think. told me " im not sure but may be the ecu ill have to take it to test at a cost of around $800"

any help guys

BrokenCar.jpeg

Sorry mate wish I could help. I currently own an 2002 147 2.0 TS manual and am having a lot of issues as well. My advice would be if it's running without too many problems then don't worry too much. My main bearing in my engine has worn out thus creating a constant and rapid clicking noise. To fix it I need an entire rebuild but as it is running fine for now I'm not too worried. Another thing to consider is when one of my spark plugs/ coil packs exploded there was no falt or warning lights being displayed at all so having the lights on may not indicate a mechanical failure.

Citroƫnbender

Sounds like solving this puzzle, could be a job for Bazz.

bazzbazz

You need a Mech that is familiar with Alfa Romeos. Sent you a PM, I MAY be of some help.  ;)

Baz
On The Spot Alfa
Mobile Alfa Romeo Diagnostic/Repair/Maintenance/Service
Brisbane/Gold Coast
0405721613
onthespotalfa@iinet.net.au

Mick A

Quote from: alfaowner251292 on June 20, 2017, 07:38:51 AM

o2 sensors showing 0 ( nothing ) when car is on.


They should read some voltage.

Mick.

Richard-Lee

Mate - thanks but as I don't have time (work all night every night) and don't have the know how to do the repairs it will be a mechanic next Tuesday - will post results - thanks very much

Cupcake