10.4:1 pistons

[Storm_X]

Just wondering who is is or has ran 10.4:1 pistons in their 2 litre before.

[jazig.k]

Dad's '82 GTV currently.

[aggie57]

Lots of people over the years. Why the question?

[LaStregaNera]

Better off using the 10:1 pistons from the Motronic Spyders. Better flame front propagation.

[NigelC]

Engine rebuild just about complete of 1979 Alfetta GTV with 85mm 10.5:1 JE Pistons http://www.spruellmotorsport.com/piston-liner-set-2000-85mm-nord-1051-apple-bite-dish-dome-p-3958.html

[carlo rossi]

I read somewhere on alfabb that these 85mm liners  were problematic in that unless you got the monobloc liner
they cracked ? I personally dont know mind you, the same blog said dont get the borgo either as they have issues as well
they did recommend the motronic however '
just my 25 cents worth
maybe they make the motronic

[NigelC]

The post I read on alfabb where the owner had constant problems with liners cracking was when he was using 12:1 compression.

[carlo rossi]

yeh i would think that 12 .1 comp on that motor
is a little optimistic