Project 164 - lets see how this goes

[Citroënbender]

If in doubt, identify the pump by its manufacturing details on the top, look them up online (matching replacement parts) to see the ends of the tubes where the fittings go.

[shane wescott]

Thanks Mate.

Good advice.

[shane wescott]

Next question. The "gaskets" on the power steering hose connections.

Anyone have any idea on where I might get some new ones of these. They are shown in this picture and parts list as gasket 10261360, 60800578, and 10261150.

Not sure If I am being paranoid, and they are just washers but I dont want to put it back in and have it leak :-(.

Any ideas Brains Trust.

Thanks in advance

Shane

[bonno]

Hi Shane
These are Off the shelf copper washers. Find attached link for supplier of one of the P/N 10361360
https://www.messicks.com/part/10261360/washer-copper

[Citroënbender]

Can also try Pirtek/Enzed etc, or if the originals are more or less OK just anneal them and re-use.

[shane wescott]

For all those watching this thread, the Project 164 needs to go.

I posted in the Buy/Sell/Swap section.

Ping me if you are interested.

Regards

Shane

[shane wescott]

New post in Buy/Sell area.

Needs to go by 16th Feb.

If you need parts make and offer and let me know.

Thanks for your help and support during this project Team :-)