FS Alfetta Sedan Project Car - SOLD

[deano]

Hi Guys,

Bit of a different one up for grabs here but its worth a look.

Originally a 1.8 sedan, this car was modified around 10 years ago to accept v6 running gear and in its hay day around 2010, it was running a 3.0 164 V6 with motec ecu and alfa 90 running gear. The car was broken up after with various part of the running gear sold and shifted between other cars and we've held onto it storing it over the years until now.

Its been handed down between a group of mates and after checking today it seems its time to pass the baton on as we all have other projects and no space.

The good:
- modified engine mounts and bell housing to suit 3.0 conversion
- car painted several times during its live so its comparatively rust free compared to what else is kicking around. Its been semi outside for 12 months in a car port and lived outside from several years between 2010-12 so its has some bubbles in the usual places.
- 15 x 7 inch rims as per this original ad included
- v6 dion, tailshaft, clutch, uprights, front brakes, rear brakes included
- dash
- interior gutted, bare metalled and painted
- rear fire wall removed for cage
- side intrusion bars removed from doors
- alfa 90 fuel pump, tank and lines installed
- new master cyls - brake and clutch
- 3:73:1 gearbox in parts included with some parts used to build another box last year so some are missing
- all ready to take a cage

The bad:
- no engine and exhaust
- most of interior gone
- no rear firewall
- no rear windscreen (smashed when it was removed)

Perfect for a track project - probably too far modified for road use but if you can get it passed then away you go. Just needs a 3.0 v6 and some work. I believe there are only a few converted v6 alfetta sedans kicking around Aus. This car was originally built by someone who knows what they are doing and its been done properly.

Asking $2.5K ONO for everything.

Cheers
Dean
0422644162

[deano]

photos

[deano]

more photos

[deano]

Gone to a good home!