3.0 v6 Ignition advance module wiring loom

Started by sportiva, April 25, 2019, 11:01:41 AM

Previous topic - Next topic

sportiva

?


Mick A

I have some notes at work somewhere but I think the purple and white is for fuel pump power when cranking only, then the AFM takes over powering it once the engine is running.

Please someone correct me if I'm wrong! I will check my notes tomorrow.

Mick.

Colin Edwards

I had a look at my 75 3.0.  That sensor on my car features Black (N) and a Brown (M) insulated wires.  No Purple / White (ZB) wire in or about the thermostat housing.

On the workshop manual electrical schematic PA371400000000 "Door-lock Device", a "ZB wire loops from the door lock unit (N11 / pin 7) to the front left door lock motor (P11 / pin 2).  Could it be possible your purple/white (ZB) wire is not original?  Has an aftermarket immobiliser been added and somehow used the door lock function to drive some half arsed ignition killer?

Colin



Present
2023 Tonale Veloce
2018 Abarth 124 Spider
1987 75 3.0

Past
2020 Giulietta Veloce
2015 Giulietta QV
2009 159 3.2 Ti Q4
2012 Giulietta TCT Veloce
2006 147 Ti 2 door Selespeed
1979 Alfasud Ti 1.5