The GT 3.2L V6 engine firing order

[MD]

What is the firing order of this engine?

[Mick A]

The firing order is 1-4-2-5-3-6.

Cheers.

[MD]

Thank you very much Mick. Expedient and factual information makes this site great. Without a workshop manual, I have been having a hard time tracking down this basic info.

Cheers.

[MD]

Got a follow up question.
I note that at the gearbox end of the engine there is a timing mark on the block just above the inspection opening. Is there a corresponding mark on the visible flywheel ?
I am seeing about a 4mm hole in the flywheel perimeter edge which I am taking to be a balancing weight reduction point. Could this be the timing mark? Seems too imprecise to be one to me.

[bazzbazz]

That should be the TDC mark. Well spotted.

[Mick A]

The other timing mark is on the front pulley and lines up with the lower webbing on the water pump at TDC.

[bazzbazz]

I believe this is what Mick is referring to -

[MD]

Encouraging stuff fellas. OK so I am good on the flywheel "mark".

Working from memory, I don't recollect seeing anything on the front pulley-not to say it's not there. I need a second squizz.
BazzBazz, unfortunately if you have added an image of some sort, it's not reproducing on your post at my place. Nevertheless I will have a much closer look as suggested.