116 Track parts

[deano]

Hi Guys,

New 75 3.0 arrived in the garage with surplus parts to my needs bolted to it:

15 x 7 rims: made by TSW. (four of them, 5 x 98) ET30 offset. Sanded back and freshly powder coated in Aztec black.  $1000 $800


SOLD
Pace front end/Volvo brake upgrade: Coming off the car is a set of standard 5 stud upright/Hub with PACE knuckle risers complete with Volvo 4 pot calipers, QFM pads, larger 156 ventilated discs and braided brake lines. Brakes set up by Marenello Pursang so the usual rebuild, drilled pistons etc. Literally a bolt on job. Will run fine with the standard booster. No more soft pedal and a front end that actually bites. $750 complete

SOLD

3 Pedal Assembly/Pedal Box: Universal floor mount push style pedal box. Includes 3 x 0.7 master cyls (universal mounting so can take anything else to match calipers) , balance bar with adjuster and throttle pedal allowing for custom mount of throttle cable. Fab would be required to fit it however there is plenty of room in the foot well for this or it can be mounted further forward with a masters through the firewall. $350


SOLD

Race seat/Harness: Autotechnica ADR glass seat bolted to modified Alfa 75 adjustable rails with adjustable side mounts and sandwich plates plus Racequip 3 inch harness. $250

SOLD

Alfa 75 3.0 Sidepipe:   2 inch side pipe coming out under the passenger door with one small muffler and O2 sensor. Bent up by Benincas originally. Wont suit me for a semi road car. $300 $200

Flick me a PM, call or text. zero 422644162

I'll try and get some photos of everything this week from the car storage.

Cheers
Dean

[deano]

some pics of some of the stuff

[deano]

.

[deano]

Hi guys,

Pulled a few more things off the 75 that aren't needed anymore. 

Stock pedal box/brake master/booster with willwood bias valve. $150

Momo Eagle steering wheel with quick release: $200

75 2.5 V6 instrument cluster $100

Full L-jetronic ECU/ engine wiring loom/AFM $200

Cheers
Dean