Edit

[Alfatango]

Edit

[afelice001]

I'd check out the alfaowner forum. I'm fairly certain this has been discussed at length 

[Colin Edwards]

Hi Alfatango,

Where are you located?

If a front drive shaft was replaced and the front toe setting now has "toe-in" or "zero-toe" the car will feel less "pointy" and lack initial turn in response.
Front end should have a bit of toe out to manage camber thrust.  Excessive toe out will wear the inside edges of your tyres.   
Is the car a Ti?

[Colin Edwards]

Looks like you had 6⁰ toe out intitially and they have now set it to 3⁰ toe in?
If this is the case, the toe in explains the lack of initial turn in.

Mauceri Motors in Clayton has an on-site laser aligner.