76 Alfetta GT removal of trim and reinstall after paint

[Paoloactive]

Hi all,

I am looking for a classic car trim / moulding remove and reinstall service for a 1975 Alfetta GT coupe which has external & internal stainless steel trim / moulding.
Remove and reinstall:
RH & LH doors around the window (an upside down U) x 3 (2 doors = 6 pieces)
RH & LH doors external sills x 2
Rear passenger window external sills x 2
RH & LH doors internal sills x 2
Rear passenger window internal sills x 2 (1 is already removed)
RH & LH front door vent windows
Please refer to photo (not my car but the same model).
The idea is to remove the trim, take the car back to the panel beater to complete the painting, take the trim to be repaired and polished (I have organised a professional).
Once the paint is completed and the trim is ready, reinstall the trim with the set of new seals and weather strips.

[GTVeloce]

I'm fairly confident Paul from Rankins Panels could do all of that for you. He can even paint it and has done many Alfas in the past. They are in Bayswater.

[Paoloactive]

Hi, yes thank for that.  I have spoken to Paul on the phone. He is flat out and he is very far from Footscray.
There's got to be more than one bloke in Melbourne on this side of the city able to remove trim / moulding or am I being too optimistic?
Thanks for taking the time.
Cheers, Paul

[Italian Supermodel]

Hi,  I removed all the brightwork trim myself off my car as the previous owner had gone to a lot of trouble to powdercoat it all in black (well he thought it looked good!). Had it all professionally blasted then I reinstalled it.
With a little bit of patience, gentle hands and some awareness of the pop rivet points it can be a rewarding thing to undertake and achieve.
I'm happy to assist.
This is how mine turned out.

[Colin Edwards]

Have you called Bruno or Giancarlo at Maranello Pursang?  They are in Brunswick - not far from Footscray!

[massiveluvbuddy67]

I'm fairly confident Paul from Rankins Panels could do all of that for you. He can even paint it and has done many Alfas in the past. They are in Bayswater.

+1 for Paul....Colin, happy to chat if you require...
Phil

[massiveluvbuddy67]

I'm fairly confident Paul from Rankins Panels could do all of that for you. He can even paint it and has done many Alfas in the past. They are in Bayswater.

+1 for Paul....Colin, happy to chat if you require...
Phil

Good call on Bruno or Giancarlo...they will know who you can trust out your way (so can Mary!)

[Paoloactive]

Yes I will give them a call for their advice. Thanks for the assistance. Cheers, Paul