Haltech ECU fitted to a Busso v6

[ALFAAA]

Hi to all,
Has anyone fitted a Haltech 2500 elite stand alone ECU to there v6 .
Are they easy to program.

[TEE Z2]

https://www.rpw.com.au/alfa-romeo-gtv6/

[LukeC]

I have fitted Haltech 750s to a number of Busso V6 engines. Very intuitive programming interface. My own 3.2 Busso has run one for 4 years without fault.

If this is your application, I will happily let you have a copy of my map.

You do not need a 2500 for a V6 even with a 24 valve V6 installation.

I am currently installing an Elite 2500 on a Ferrari 400 engine for a client. I need the 2500 to get the channels for this application.

[ALFAAA]

Hi LukeC,
I was advised by Haltech to fit the elite 2500 due to my 3.2 has multiple throttle bodies.
It would be great if you could send me a copy of your map.
Have you had the Coil packs continually sparking when the ignition is on.
At the moment I have all the coil Packs disconnected.

           

[LukeC]

Haltech are great, but tend to upsell to your requirements... 

Not sure what you mean re coil packs sparking. They only spark when they are supposed to (engine cranking/running).

I am OS at the moment. Call me later next week.

0402779738

[MD]

ALFAAA,

Please clarify " Coil packs continually sparking when the ignition is on."

A Wasted Spark configuration may give an impression that the coils a continually sparking but otherwise as Luke says, unless the engine is actually running that condition is impossible.

Otherwise it is some sort of configuration fault.