Extractors

Started by Alfalfa, September 17, 2009, 12:59:22 PM

Previous topic - Next topic

Alfalfa

Afternoon all,

thinking about putting a nice set of extractors on alfie. Just after some opinions on brand etc and what you have fitted and how you've found them.

cheers
Current:
2009 Ford Focus XR5T
1982 Alfetta GTV 2.0 (out to stud)

Previous:
1986 Nissan Pintara Shaggin Wagon

Mat Francis

Fitted a set of Graham Facey ones onto mine. Was hoping it would give it a slightly better note, wasn't really concerned with performance.

I got a huge surprise. More induction noise, cleaner sound and noticeably more grunt down low. Don't believe this particular set does much higher in the rev range (just my opinion though, you would have to ask someone who really knows what they are on about for the specifics of why one design produces power in different areas etc).

Overall hugely happy. Would i do it again? yes. But from a different manufacturer. I'm not unhappy with these, just want to give everything a try  :D


Oh and i also got driven around in a car with a set of Vin's PACE extractors on it once. Amazing. But i'll leave that for someone else with first hand experience...
'83 Alfetta Sedan TS
'88 75 3.0
'85 Land Rover County
'87 Land Rover Perentie

Fast Eddie

are you talking Alfetta or 105?  in which case the only answer is PACE - Vin Sharp has been perfecting these over years. He advertises on the site and is an AROCA Vic life member
Now -
nuffin
Then -
76 Sud L 1.3
85 33 1.5
00 156 Selespeed
77 Alfetta GTV - Group S project - "yellow peril"
86 SudSprint 1.5 - clubsprint car
77 Alfetta GTV - Tarmac rally/Group S
03 156GTA 3.2 manual
80 Alfetta GTV
07 166 -3.0 Ti.
86 GTV6

Alfalfa

yeah I remember you telling me about them at the Dyno day Mat, but I never got the name. I think I'll look into getting them off Vin.
There's no need for concern on ruining the sound I've got at the moment is there? I'm too scared to touch the thing, can't see it getting any better..


Quote from: Fast Eddie on September 17, 2009, 09:02:56 PM
are you talking Alfetta or 105? 

It's a 116 Alfetta GTV 2.0...as per my photo

thanks lads.

now a long shot I know but i don't suppose anyone has a video or sound clip or something?   ;D
Current:
2009 Ford Focus XR5T
1982 Alfetta GTV 2.0 (out to stud)

Previous:
1986 Nissan Pintara Shaggin Wagon

Sheldon McIntosh

Doesn't sound as good as that 90 that goes through before you though!  ;D ;D

dehne

i agree with sheldon that sweet grunt of a 2.5 v6 blasting past the only thing that i could think of that sounds better than sheldons 90 is mine ;)
now
1x 85 mdl road 90
2013 Giulietta 1.4
2015 Launch Edition Giulietta
Past
Multiple Alfa 90's, Alfetta's and 147's

Sheldon McIntosh

That does sound bloody nice actually, Chowder.  What layout have you got?

jimnielsen

This car had Vin Sharps PACE extractors as well - it does sound a bit like a 'bee' but they are very effective!

http://www.youtube.com/watch?v=3dADhKf6Um4
'95 Alfa Romeo 155 Q4
'90 Alfa Romeo 33 1.7 IE - my god! I can compete in Trofeo class!! -