rear axle removal

Started by sportscar, December 21, 2009, 06:31:51 PM

Previous topic - Next topic

sportscar

hi can anyone help me i need to change the rear studs on my axle.do i use a puller to remove the axle shaft ?

105s alive alfa parts

Hi, if you take off the wheel rotor, you should be able to tap out the axle with a light hammer, but be sure to turn the axle to hit it evenly all the way around and it should pop out with a bit of leverage to help it come out, i hope this helps, if not you can call on 0413 305 306 and i might be able to explain it better over the phone, cheers
Ang
1970 1750 Concourse
1971 1750 (modified club racer)
1965 mustang fastback (i crossed to the dark side)
Wrecking: 3x 1750 series 2 gtv, 1750 Berlina

Barry Edmunds

A wheel puller is the easiest method of getting axles/s out. I have one if you get stuck. Call me on 0405 383 431 if the hammer method doesn't work.
Barry

sportscar

Thanks guys! thats heaps of a help .i will try the hammer method tomorrow otherwise a puller will be the go.
cheers