GTV6 + 75 extexded uprights/drop spindles + fibreglass bonnet

[rob1spi]

Hi Guys,

I purchaced a set of 1" drop spindles to run in my 75. They require 16" wheels to be installed. I wish to make my car eligable for Veloce Racing Assoc in NSW so can only run 15's. They were manufactured by Richard Jemison in the USA www.scuderiagiallo.com. I now wish to sell them to purchace .75" drop spindles. my mistake. should have researched b4 I bought. will take $500 for the pair plus postage. if your interested give me a call on 0405 603 053.

regards,

Robert Simcic.

p.s There was a bit of interest in fibreglass panels for 75's . I am in the process of making a mold for a 75 bonnet. If anyone is interested let me know. cheers.

[Storm_X]

stupid question
but what do the extended uprights and drop spindles do ?

[Sheldon McIntosh]

stupid question
but what do the extended uprights and drop spindles do ?

There're no stupid questions.  They lower the ride height without affecting roll centre (well, without affecting it too much).

Hey Rob, can I ask what the postage was to get these from the states?  I was thinking of getting some .75" as well.

[rob1spi]

Hi Sheldon,

about US$100 so @ the mo AU$120.

cheers.