GTV6 front Wheel Bearings

[shane wescott]

Thanks Mate.

I am interested to know if the seal is the right size. The kit i bought was supposedly an equiv of the koyo kit but had the wrong seal.

Good luck.

Catch ya

Shane

[shane wescott]

just to finish this thread off found my kit of skf bearing and seal for the GTV6 front wheels.

The seal is SKF 13421 /P

one bearing LM 11949  /910 /q

other one is bt1b 328 688 ac  /q

[MD]

That's good info Shane for the DIY crowd.
For future reference, to the best of my knowledge, the same bearings and seals would fit all the transaxle models as the only change is in the stud numbers and PCD. The wheel bore is the same so the hub size should be the same and like wise the stub axles are the same hence the uniformity.

Franck. Your luck has changed. There's a vacancy sign come up in the Irish house. The sign says the applicant must be able to count on both hands. Send me a PM with your phone number and I'll pass it over the fence. 

[116gtv]

or future reference, to the best of my knowledge, the same bearings and seals would fit all the transaxle models as the only change is in the stud numbers and PCD

IMO, the outer front bearing is bigger, hence different part number, on the 5 studs,