giulietta gearbox reassembly

[armc89]

hi i have just recently stripped down my 116 gearbox, replaced the worn syncros and i have put it all back together, i was just wondering if the nut on the main shaft has to be set and a specific torque or is good and tight sufficient? any help would be much appreciated, these gearbox will only be in for a short time as im looking for a ts gearbox

[Alan Hopla]

The Haynes manual lists the mainshaft nut torque as 115Nm or 85 lbf ft.
Alan.

[armc89]

good man! thanks for your help.

[Anthony Miller]

Hey Aidan, I've just found a Haynes manual if you need it