Decal placement

[bonkfrog]

I'm re-newing decals on my 1984 GTV 2.0. Does anyone know where they should be placed?

[Sheldon McIntosh]

What decals are on a GTV?

[Evan Bottcher]

go to www.google.com
click 'images'
type 1984 GTV 2.0L

Pretty straight forward wouldn't you say?

For amusement (slow night) I just did that - and the eighth result was this image:

[Alfalfa]

go to www.google.com
click 'images'
type 1984 GTV 2.0L

Pretty straight forward wouldn't you say?

For amusement (slow night) I just did that - and the eighth result was this image:

LOL

[Evan Bottcher]

Right, so we've established that Mick's advice is of no use. Which decals are you talking about? Under bonnet?

[bonkfrog]

Evan

I'm looking for under bonnet decal placement. In particular: oil type, original spares. The boot was straight forward.
I'm not game to go near Google - what would the fat controller say if she looked up net history?
Thanks to all who responded.

Bonkfrog

[Craig C]

There is a caution one on top of the break booster, a water level one on top of the coolant overflow tank, both read from the front of the car.  On the washer bottle, from the front to rear there is an electrical caution one with the lightning bolt (read from the front) and then there is the oil types one but that is read from the passenger side.

Hope this helps.

[bonkfrog]

Thanks Craig
The oil decal - where does that go? I'm running out of space & seem to remember that it went on the bonnet itself on the Super I had. No room on the Alfetta bonnet, what with the attached lining and all.

Bonkfrog

[bonkfrog]

Oh (light dawns) - thanks Craig, both on the washer tank. Read the instructions, Read the instructions, Read the instructions.

[Barry Edmunds]

Bonkfrog
I have got a near complete set of decals (including under bnnet) available

Barry
0405 383 431

[bonkfrog]

Thanks Barry
I have already got the decals, including the boot decal for spare tyre removal - from Mt Carmel Spares in Israel. I've since applied them in approximately the correct positions. More importantly, I spent yesterday fitting the yellow Konis and replacing reaction arm bushes - now for extractors and inlet extensions.

Cheers

Bonkfrog