WTB, 15" x 7" rims, 5 x 98

[Dna Dave]

Those Momo's are nice.

Has anyone had any experience with Superlite Wheels?

Dave

[116gtv]

Dave, I've got a set of momos buy can't tell if they are 7" wide- no stamp. You can see them here:
http://s912.photobucket.com/albums/ac327/116gtv/Momo%20wheels/

$280 for the 4 without tires or will swap..

[GTV-TS]

Hi I may have something - they look like Ronals are 15" GTV6 stud pattern but will have to check width and offset for you - will do it tomorrow, and they are for sale.

[Dna Dave]

Great, let me know

[hammer]

Dave,

I bought a set of five Performance Superlites back in 2007 for the 75 I was building up at the time. I went for them because you could order 15 x 7 in 4/5 x 98 pcd in two different offsets and they could turn the order around in 6 weeks for $200/wheel. They look sensational on the twinnie shod in 205/50-15 R tyres. The only drawback is they are bloody heavy but a good lightweight wheel is going to cost twice the money.

Cheers,

Brent

[Dna Dave]

Hi I may have something - they look like Ronals are 15" GTV6 stud pattern but will have to check width and offset for you - will do it tomorrow, and they are for sale.

Hi GTV-TS,

Any luck with these, I am still looking for a set.

Thanks
Dave

[116gtv]

My momos are still for sale if anybody else wants them- they are 15x7s Et37 $280 without rubber or $380 with usable and quite sticky federals 205/50s- see link above..

[Sheldon McIntosh]

Any luck yet Dave?

Martin, I can't believe no-one has snapped those up considering how cheap they are and how hard this size is to get.

Came across these guys, who are going to do a replica BBS (the best looking wheel for any 80s car IMHO) in a 15x7, apparently drilled to any PCD/offset required.  http://cgi.ebay.com.au/BB5-R5-BBS-RS-STYLE-17-INCH-WHEELS-VW-ALFA-PEUGEOT-FIAT-/270598383024?cmd=ViewItem&pt=AU_Car_Parts_Accessories&hash=item3f00eba5b0

[Dna Dave]

Sheldon,

Thanks, i saw those the other night, they look like what i need, the offset is what i'm looking for (around ET20), he is getting the 15" x 7" in sometime in July, if i still haven't found a set i will get a set of him.

I agree with your comment regarding Martins wheels, if they had a more suitable offset i would have bought them.

Thanks
Dave

[spieret]

I know they aren't 15" but what about these , i think they would look good on a GTV6

http://www.ebspares.co.uk/news103.htm

[Dna Dave]

I know they aren't 15" but what about these , i think they would look good on a GTV6

http://www.ebspares.co.uk/news103.htm

Nice, but they have to be 15" x 7" to run in the VRA, I already have a couple of sets of 17" x 7".

Thanks anyway

Dave

[GTV-TS]

Hi Dave,

Sorry for the delay in reply but I don't get on the forums that often & work has been full on.

Well I finally checked the wheels I'm selling.
Unfortunately they are 15" x 8" which I assume is no good for you as you were asking for x 7"
I wrote down the offset a few weeks ago I can't find it at moment.
If per chance your still interested i will look at the wheels again.
I will make an effort to get on the forum more frequently next few weeks.

But always contactable on my email alex.c@ozemail.com.au
I can email photos if your interested.

Cheers
Alex