Spark Plugs 83 gtv 2lt

[drewster71]

Howdy folks,
Am in need of set of spark plugs and was curious if it is possible to by pre set ones, have just bought set for sons comondoor VT and came ready set so just take out old and put in new, Im in adelaide anyone now where to buy?

Cheers in Advance Drew

[Storm_X]

Howdy folks,
Am in need of set of spark plugs and was curious if it is possible to by pre set ones, have just bought set for sons comondoor VT and came ready set so just take out old and put in new, Im in adelaide anyone now where to buy?

Cheers in Advance Drew

Super cheap auto and use a gap setting tool.

really easy.

[dehne]

ngk b7es are the right ones ready to go from super cheap and $4.50 each just brought them for my car

[Storm_X]

i find that ngk is best for my alfa engine

[drewster71]

Thankyou everyone

will get them today,

Drew

[dehne]

choder if you go to the auto shop ngk has just redone its sparkplug list and have updated every thing and now the b7es is the ones that they recomend now they are a better fit, but dont listen to me list to NGK its what they say 

[stradale]

Denhe
Ignore..... the the chosen one / chowderhead / choderboy
His posts are usually just short of a sentance and are often critical of other peoples opinions
He has contributated  very little in the way of original thought or ideas to any thread .
He just stabs and jibes in different threads to provoke people.
over the past few weeks you have copped a lot of flack from him.
I admire your resiliance, he keeps slapping you around and you keep standing up to him
Good on you!

[stradale]

HI DREW

Golden Lodge HL and 2HL  spark plugs are perfect for 4Cyl Alfas
they are a surface discharge plug and do not need to be gapped
and with regular cleaning will outlast other plugs, they were factory fitted to Alfas for decades

[Typhoon90]

Every spark plug fitted to an engine should have it's gap checked, even if it's just a quick visual comparison to the others. I've seen more than one pre gapped plug with teh gap closed up due to poor handling.

Regards, Andrew.

[Anthony Miller]

Seriously Glenn! how does this help?

Denhe
Ignore..... the the chosen one / chowderhead / choderboy
His posts are usually just short of a sentance and are often critical of other peoples opinions
He has contributated  very little in the way of original thought or ideas to any thread .
He just stabs and jibes in different threads to provoke people.
over the past few weeks you have copped a lot of flack from him.
I admire your resiliance, he keeps slapping you around and you keep standing up to him
Good on you!

Mick might be a little pedantic but when you are ordering spare parts you need to have the correct code or else you end up with something you can't use. Obviously Dehne has a thicker skin than you give him credit for and when Chode has a go he will stand by what he has said and not run around removing the offending post leaving only the replies and then rejoin the forum under a different  name FFS

[dehne]

well it is true, i dont care how much crap he gives because i have my own opinion of him and i look at the positives on this forum not the little dicked who try to belittle everyone elses comments, some times people need to check there facts before having a go

[Anthony Miller]

Sorry Drew, don't mean to hijack your thread

well it is true, i dont care how much crap he gives because i have my own opinion of him and i look at the positives on this forum not the little dicked who try to belittle everyone elses comments, some times people need to check there facts before having a go

Sorry mate but I think Mick knows his shit and I don't think he was having a go, Glenn is just shitstirring. You are correct, the NGK website lists the plug as a B7ES with a 0.8mm gap it also lists an Iridium plug BR7EIX wich must be something new but the plugs in my old 2.0l were BP7ES and they were always good to go straight out of the box no need to gap.  Let's not resort to calling each other names, one would think we left all that behind on the schoolyard.

[stradale]

Sorry Dehne
Didn't mean to draw heat to you

Thanks Anthony
I will be a little more thicked skinned in the future

Hi drew
Google........... Golden Lodge HL and 2HL or read Greg Gordon's posts at GTV.org

[Sheldon McIntosh]

some times people need to check there facts before having a go

Good point.