FS - GTV116 Body Parts - Doors/Hatch/Bonnet

GTV-TS · June 13, 2010, 09:23:08 PM

Have following body parts for sale from early series GTV116:

Doors - left & right (right only SOLD)- just the shell -no intrusion bars - $ 250 / door ono
Hatch - shell - no glass or fittings - $ 200 ono
Bonnet - $ 100 ono

All panels are in good condition, primed.

Contact Alex on 0412 004 284

GTV-TS · September 19, 2010, 11:02:54 PM

Have following body parts for sale from early series GTV116:

Doors - left & right - just the shell -no intrusion bars - $ 250 / door ono
Hatch - shell - no glass or fittings - $ 200 ono
Bonnet - $ 100 ono

All panels are in good condition, primed.

Contact Alex on 0412 004 284

marks alfetta · September 21, 2010, 06:32:51 PM

Hi Alex

Do you have a LHS rear quarter panel and if so what are you asking for it?

Regards

Mark

GTV-TS · September 22, 2010, 10:34:04 AM

Hi Mark,

No don't have that panel.
Body went some time back, and have only body parts listed.

But I did forget that I have rear alfetta panel (below hatch line, including tail light rcesses) cut from another car which i had as a spare for my track car but no longer need.

Cheers
Alex

kartone · September 22, 2010, 01:29:37 PM

What year ?

GTV-TS · September 22, 2010, 04:58:54 PM

Not sure of the exact year as they are off a project complete shell I bought and got rid of a few years back, but kept the panels as spares for my race car.
Shell was definitly an early steel bumper Alfetta GTV, so I guess potentiall anywhere between 1976 and 1980.

alfagtv152 · September 22, 2010, 06:34:57 PM

Do you have the 2 little plastic grills from the front under the bumper.
Cheers
Andrew

GTV-TS · September 23, 2010, 09:11:22 AM

No I don't Andrew.

But I do have the old style covers for the rear quarter body vents.

Cheers
Alex

kartone · September 23, 2010, 01:12:25 PM

Does the door panel have a fixed or operable deflector window (little triangular window) ?

GTV-TS · September 23, 2010, 01:36:42 PM

Good question, I will have to check door and let you know, but the door I have is only a shell so does not have the corner window itself.

I guess depends what the early steel bumper Alfettas had - anyone know for sure?

My 1981 Alfetta (plastic bumpers) has a fixed one, so I guess the plastic bumper cars all have the fixed corner window?
If all steel bumper cars had the hinged corner window, then this door could take the hinged window as it is off a steel bumper Alfetta.

GTV-TS · September 27, 2010, 08:45:56 PM

Panels are still available for sale.

GTV-TS · October 11, 2010, 02:59:53 PM

Parts still available for sale