looking for 27mm Torsion bars

[ARQ164 Shane]

g'day all,
hope you are have a good day.I'm looking for eg; 27mm too 30mm torsion bars
if you can help please let me know ?
thanks a bunch guys and dolls
Cheers Shane

[Anthony Miller]

Try Vin Sharp at pace engineering for new ones, you'll find his contact on the sponsors page, you'd be very extremely lucky to find a set second hand.

[ARQ164 Shane]

hi,
there for my "87" 75 .
in the USA i can get them for about $399 plus $70 post. what are thay worth at pace??
cheers Shane

[Duk]

http://www.performatek.com/frOnlineCatalog.htm

[Sheldon McIntosh]

hi,
there for my "87" 75 .
in the USA i can get them for about $399 plus $70 post. what are thay worth at pace??
cheers Shane

Then again, PACE are a long time club sponsor, who help pay for many club activities and services.  Like this forum for example.

[ARQ164 Shane]

hi all,
yes I know the USA dealer. but did not want to up set the apple cart.
Do pace eng have a web site? or an add .is it all word of mouth.
cheers Shane

[deano]

Hey Shane,

No website as far as I know. Give Vin a ring: 03 9844 0147. Vin will be able to help you set the car up as far as rear srings, knuckle risers, shocks etc.

He has helped me out on several occasions and was able to get my shocks for me cheaper then anywhere else.

[vin sharp]

hi,
there for my "87" 75 .
in the USA i can get them for about $399 plus $70 post. what are thay worth at pace??
cheers Shane

Hi Shane, 
Only their 27mm bars are $399,............ anything bigger is $699.........plus freight.
ALL of my bars, from 28.5 to 32 are the same cost at $590aud.
Cheers,
Vin.

[ARQ164 Shane]

hi Vin,
thank you for that help. that awesome
cheers Shane