Alfa 75, GTV6 Sump Gaurd :Expressions of Interest

ARQ164 Shane · October 07, 2010, 08:39:42 AM

Hello All,

I can supply sump gaurds for Alfa 75, GTV6. Fabricated like the originals, will add some pics. Cost is approx $80 depending on postage costs and location.

If your interested PM me.

Cheers Shane.

jazig.k · October 07, 2010, 07:28:23 PM

hi there,
how much clearance do you lose with one of these fitted?
im very low already but a gaurd could one day be a life saver...

ARQ164 Shane · October 07, 2010, 10:51:00 PM

hi are at www.cardomain.com/ride/3805304/11
going away on the weekend see you on monday.
cheers Shane

ARQ164 Shane · October 10, 2010, 08:11:23 PM

hello guys,
u-pull-ti south sucks, they have car listed there don't have.conplet lack of help.
It's all too hard

Storm_X · October 11, 2010, 05:32:36 AM

hay shane i sent you a sms on saturday but i guess you left the pone with the misses.

ARQ164 Shane · October 11, 2010, 08:35:32 AM

just left you a PM

ARQ164 Shane · October 11, 2010, 08:41:46 AM

So the Sump gaurd are made from 5mm flat bar and are 3.7 kg .
I will have 2 made this week if any one is interest.
post to S.A is $8.80 .
Cheers Shane. have a nice day

njh1964 · October 15, 2010, 08:56:00 PM

Hi Shane,

There should be a local market for 105 series Alfa sump guards as well, if you could fabricate those. I, for one, would be interested.

Cheers,

Nick

ARQ164 Shane · October 21, 2010, 09:11:42 AM

Hi Nick,
I need a 105 car to made, one any volentears

How much does the sump hanging down below the c/rails ?

Cheers Shane

ARQ164 Shane · November 27, 2010, 12:41:08 AM

I can now make sump gaurds for 105 alfa for about $100.00
please feel free to ask me a questons.
cheers

ARQ164 Shane · December 01, 2010, 08:37:12 AM

you check ti out at; www.cardomain.com/ride/3805304/11
thanks all

Badwolf75 · January 05, 2011, 01:52:54 PM

Hi Shane

Nice work on the guards :-) I notice you have a 2.5, would one of these guards fit a 75 twin spark? Also, I've got an aftermarket exhaust which hangs a bit lower than standard - would that get in the way when installing?

Cheers mate

ARQ164 Shane · January 05, 2011, 04:00:06 PM

g,day badwolf ,
I can custom make it to fit your car, but I need a few measurements from you
from the chassi rail. And where are you in australia please?

all the best shane

Badwolf75 · January 06, 2011, 10:55:29 AM

Cool. I'm in Sydney.

I'm still toying with the idea at the moment - I don't really want to give up any more ground clearance, but there again it's probably worth the peace of mind knowing that I'm not going to rip the sump off $:-\$ I'll get back to you.

Cheers

ARQ164 Shane · January 06, 2011, 05:52:28 PM

thanks. that cool

Shane