WTB: Alloy Wheels for 116 Giuletta

[jfloyd]

Wanted To Buy -

One set of 4 x 98pcd in 15 inch x 7 (or 7.5); offset 30 to 35 positive.

Please PM me or call my mobile: 0422 007 378.

Many thanks

John.

(I'm in Melbourne)

[John A Pucak]

Hi John,I have a set of Velox lightweight alloys 15 x7 4x98 . They will fit over GTV6 calipers. I would like $300 for them

Cheers,
John

[jfloyd]

Thanks John. PM sent.

[Paul Gulliver]

John,

I have a set in Melbourne, tucked under ther house so i will need to confirm the offset. I have sent you a PM.


Gully

[John A Pucak]

Hi John, sent you some pics to your phone.I don't know what the offset is, though i did use these rims in my early Supersprint days on the Alfetta GT. These rims will fit the 4x98 pattern and will clear a GTV6 brake package or a standard ATE set up

John

[Storm_X]

sorry to hijack but i am also after some 4x98 7" wheels 14 15 or 16"

[Neil Choi]

I thought I would chime in a bit without hijacking the thread.

Good point by John P, beware that the 15" rims clears GTV6 brake set up.  Not sure what brake set John F has.

Ask me how I know.

I have two sets of simmons B45 15" and fitted the GTV6 set up, upon fitting simmons, they rubbed badly on the calipers without spacers.  Then the spacers spaced out the wheels so much that it did not sit hub centric so resulted in a wobble at >100km/h. 

Neil

[jfloyd]

Thanks Neil for the advice. I have GTV6 calipers. Experienced horrific wheel wobble at PI recently. Close inspection of my ROH Gamblers bought 13 years ago revealed worn out stud holes due to them not having metal inserts, as there was not being enough alloy around the centre to accommodate inserts. And yes, I have been using 6 mm spacers, so maybe they have not been centering properly as the holes have gradually worn. I will therefore prefer the wheels not to need spacers.

Will make a decision tomorrow on the prefered wheel options. 

John.

[giulia_veloce]

Hi Jfloyd

I have 4 = 4 by 98 Compmotive 3 piece wheels here for sale.
They look like 7 inch wide,but will verify if you are interested.
$500

Robert

[jfloyd]

Hi Robert,

Thanks for the that. PM sent.

John.

[John A Pucak]

Velox leight weight alloys 15 x6.5 suit Alfetta 4 stud 4x98 , will fit over Brembo calipers
$300. used for 5 supersprints only

[John A Pucak]

More pics

[Fetta GTV]

Hi John

PM sent

Cheers
Fetta GTV