wtb slave cylinder for 90/75

[dehne]

hi there im looking for a new slave for the 90, have looked on ebay they have them but they are the wrong sort does anyone know where to get one in aust
thanks

[MD]

What's wrong with the one you got?

[dehne]

its is knackered, is letting air in have tested everything else and have come up with the rubber seal in the piston head is not sealing right,

[MD]

As Choderboy says, these things can be reconditioned. Honing is one option if the bore is not excesively pitted. If it is, it can be resleeved with a stainless steel tube or brass one followed by new rubber.This usually makes them good for life.

The same principle applies to brake master cylinders and even calipers. In the case of calipers, it is usual for the pistons to be sleeved unless the cylinder seal wells are corroded in which case it's bin job unless you got money to burn.

[dehne]

can get new ones for around $100 so i think ill buy a new on less hassel and i know it will work. thanks for the options

[MD]

Hang on, weren't you the guy who had trouble getting a new one in the first place hence the posting? Seems like you are back to square one.

[dehne]

the post was so maybe some one knew where to get one, today i have found today that the 105 ones fit and work fine, all you need to do it keep the old push rod and thats it there the same thing, so now does anyone know where i can get one, im going to look now so here is hopeing

[Cool Jesus]

Guys, he's trying to find me a goat named Albert at the same time, he's a bit busy...

[dehne]

i rang turin imports and they dont make the one for the 90 anymore, and he told me about the 105 one
the good news THE GOATS BEEN FOUND,
the bad new i had goat stew for tea, sorry, but i can send you the bones

[Mike]

I have one...$300,000 AUD should do it, I'll deliver it to your door personally....keep the bones.

[dehne]

sold, but i think you should throw the delta in for the deal to proceed quickly

[Mike]

funny prick....Consider it done.  I'll take 300k and I'll throw the delta in...I'm that kind of bloke you know ;-)