147 rear bumper inserts

Started by tony8028, December 29, 2011, 08:06:58 PM

Previous topic - Next topic

tony8028

My wife backed in to wall while maneuvering one of her touch parking techniques and it has grazed the bumber as well as the little rubber insert on the rear passenger side.

There is only a light scuff on the bumper itself but the rubber insert is noticeably grazed.

I was wondering whether these are available seperatley either from wreckers or as new spare parts - or do you have to buy the whole bumper?

OR...can rubber be 'buffed' to smooth off these rough edges?

thanks Tony
(past cars)
1988 Alfa 33 ti
1990 Alfa 33 ie
1992 Alfa 75 TS
1988 Alfa 75 TS
1990 Alfa 164
Currently driving 2004 147 Manual

colcol

Try getting some 'wet and dry' abrasive paper from an automotive store and using rough paper remove the graze out of the rubber, then progressivly use finer paper to remove the big scratches with little scratches, until the finish and shine of the rubber matches the rubber strip, failling that, try calling a few wreckers to see what they want for a second hand bumper that they might have the correct colour, or see if they will sell you just the rubber strips themselves, try polishing the scratches out of your bumper and see how it comes up, a rello of mine has a 147, and he put parking sensors on it, that actually work quite good, because she who must be obayed, likes to squeeze 'Bella' into tight spots!, look on the Alfa Club web page for wreckers, Colin.
1974 VW Passat [ist car] 1984 Alfa 33TI [daily driver] 2002 Alfa 156 JTS [daily driver]

tony8028

thanks colin....good advice.....will give the wet and dry paper a try.
(past cars)
1988 Alfa 33 ti
1990 Alfa 33 ie
1992 Alfa 75 TS
1988 Alfa 75 TS
1990 Alfa 164
Currently driving 2004 147 Manual