Wanted Engine Flywheel off a Alfa 75 3.0Litre V6

[marinoci]

Hi All,

I am after a 3 litre Alfa 75 flywheel, anyone have one lying around or know where I can get one?

thanks,
Marino

[aggie57]

Can I ask why?

[marinoci]

Looking to put a 156 GTA motor in my 1985 gtv6 and my research tells me I need a 3.0Litre flywheel to ensure proper engine balance.

If anyone can verify would be great.

[njh1964]

Hi Marino,

I have a spare flywheel for an Alfa 75 Twin Spark... not sure if that is significantly different to a 3 litre, and if it would be of use to you.

Regards,


Nick

[aggie57]

Looking to put a 156 GTA motor in my 1985 gtv6 and my research tells me I need a 3.0Litre flywheel to ensure proper engine balance.

If anyone can verify would be great.

OK - hence why I asked.  On a 3 litre 164 engine you can use your 2.5 GTV6 flywheel with a 4mm spacer between the crank and the flywheel.  Not sure but I believe the 3.2 engine is the same - Hugh Harrison at Monza Motors (site sponsor) has done at least one 3.2 to GTV6 conversion so give him a call to verify. 

What you do then is get the 2.5 flywheel and front pulley balanced to match the ones that come off the 3.2 engine.  Voila - balanced bottom end.  Just like J-Lo 

[marinoci]

Great Feedback, thanks Aggie57,
I will get in touch with Hugh and share any info I can.