Alfetta stuff for sale

[Mat Francis]

Hi all,

Putting more and more V6 stuff in the shed, and have come to the realization that I no longer have space for this stuff, and I'm unlikely to need it in the near future. So, I offer the following for sale.

5 Campanatura (I think that's how it's spelt?) wheels for an alfetta. 4x98 obviously. 4 of these were sand blasted and resprayed in a metallic silver. They were used on my alfetta before I put 5 stud hubs on it about 3 times, the only marks on them are from wheel nuts. The spare is in as is original condition. Three of  them have Yokohama advan 32's on them. The other 2 have dunlop formula R's. As the photos show you would expect to get another 2 or so sprints out of these before you will need to replace the tyres. The wheels have all been dry stored, no contact with sunlight for 2 years. Obviously not as sticky as a new set of tyres, but excellent for someone wanting a cheap way onto the track? $300 ono for all 5.

Next I have a set of extractors. Don't know who made them, I bought them from another club member a couple of years ago. These gave a good improvement in the mid and low range, but won't offer huge amounts up top from my experience. Perfect for a standard or mildly tuned motor, however I suspect the inside diameter of the pipes would be too small for a full race setup. I have a standard exhaust system you can have for free with these. May require modification to fit, but it would be a very easy job for your preferred exhaust shop, and means you could keep your entire existing system as is. $250 ono.

2 surplus sets of standard cast iron alfetta headers. No cracks that I could see. free.

1 pair of rear bilstein shock absorbers. Both feel good when compressed/ expanded. One of these however will need a die run over the bottom thread on it, as it is looking pretty sad. Can still get a nut on it, but I definitely would not use it in it's current condition on my car. $100 ono.

Lastly, and not alfetta related, one pair of 75 side skirts with all 4 jacking point covers. Usual sand blasting etc. I will not seperate the jacking point covers, because a) I'm not going to be responsible for breaking them, and b) I want the side skirts gone as well. All or nothing.

No postage sorry, as I just don't have the time, but any other questions please feel free to ask

Cheers

[Mat Francis]

Extractors and shock absorbers

[Mat Francis]

headers and side skirts

[Paul Gulliver]

Matt,

PM sent

Gully

[Mat Francis]

Wheels, side skirts and one pair of the cast headers are accounted for at this stage.

[pep105]

Mat
Umm PM Sent
Cheers
Pep