Alfetta GTV Rear Spring Support Plates

[michaeljc]

I am reinstalling the rear de-dion assembly with new gearbox etc. but I would like to replace at least 2 of the 4 thin pressed plates that each end of the coil spring sit on. Two of mine have cracked open (as per photo below).

I am interested in some OK ones from a wreck or suggestions of a better mounting/seating material for the springs.

Lightweight items so postal of plates from anywhere in Oz sounds simple enough if anyone has some.



PM me if you can assist. ... Michael.

[goodallallan]

You can do without them. They don't do anything except make the car about a centimetre higher. I f you do want to keep them, cracked ones work perfectly well - mine have been cracked for 10 years.