Alfa Romeo Owners Club of Australia Forum

General Category => Buy/Swap/Sell [Announce ONLY] => Topic started by: Polishstorm on January 26, 2012, 11:37:42 PM

Title: FS BRIS: 17 in Rays Volk TE37's to suit 5 stud Alfa!!!!
Post by: Polishstorm on January 26, 2012, 11:37:42 PM
Hey Guys,

I have had these sitting around after I sold my car as I was looking for another one to fit them to.

They are TE37C's
17x7.5 all round
Offset is +30ET
Carbon Fibre centre Caps
Rays blue anodised Valves

2 x Bridgestone Potenza GIII 215/45/17 with 75% even tread
2 x Yokohama Advan S-Drives 215/45/17 with 90% even tread

One of the rims has a small mark on one of the spokes but no biggie.

Great rims as we all know and very light.

Dont really want to sell them but I am not going to be using them any time soon so Someone give them a good home.

IF you want them to fit other patterns like skyline/soarer/supra/rx7/mercedes/audi/silvia/180sx or any others you can purchase conversion adapters from:
http://stores.ebay.com.au/AUTOWHEELS-AUSTR...sid=p4340.l2563 (http://stores.ebay.com.au/AUTOWHEELS-AUSTRALIA-PTY-LTD?_trksid=p4340.l2563) or
http://www.ebay.com.au/itm/FORD-CHEV-HOLDE...=item1c22e7c4c1 (http://www.ebay.com.au/itm/FORD-CHEV-HOLDEN-ALLOY-WHEEL-ADAPTORS-SPACERS-/120844698817?pt=AU_Car_Parts_Accessories&hash=item1c22e7c4c1)

Pick Up From Upper Mount Gravatt (will post at buyers expense and organisation)

0408 six zero five 725

$2500.00

(http://i15.photobucket.com/albums/a373/polishstorm/photo.jpg)
(http://i15.photobucket.com/albums/a373/polishstorm/photo1.jpg)
(http://i15.photobucket.com/albums/a373/polishstorm/photo3.jpg)
(http://i15.photobucket.com/albums/a373/polishstorm/photo3.jpg)
(http://i15.photobucket.com/albums/a373/polishstorm/photo4.jpg)
(http://i15.photobucket.com/albums/a373/polishstorm/photo5.jpg)
(http://i15.photobucket.com/albums/a373/polishstorm/photo6.jpg)
Title: Re: FS BRIS: 17 in Rays Volk TE37's to suit 5 stud Alfa!!!!
Post by: hammer on January 27, 2012, 10:45:30 PM
Great rims man. I run the TE37s on my race car (in 15 inch). Best of luck with the sale.
Title: Re: FS BRIS: 17 in Rays Volk TE37's to suit 5 stud Alfa!!!!
Post by: Domenic on January 30, 2012, 02:17:58 PM

You'd be better off selling them to suit Subaru's or any other Japanese car that runs a PCD of 5x100

From what I can see in the pictures, the PCD is 5x100, Alfa Romeo's are 5x98, not 100% sure on the newer ones (159/Brera/Giulietta). So technically they don't suit Alfa's.

Good luck with the sale anyways.