GTV6 ignition module replacement

[CraigGTV6]

Hello guru's
We're taking the GTV6 from NE vic to the Bay to Birdwood this year, and although it's running well, I'd like to take a few spares 'just in case'....
My biggest worry is the ignition module which is the alloy box type, and is the same age as the car. After extensive searching I can't find a straight replacement. Most parts suppliers list the TIM 017 as the replacement but it looks nothing like the original, and has 7 pins not 6. I'm concerned that 'on the side of the road' I may not be able to wire it up, ie a different plug would be required etc.
My questions are:
Is this the correct replacement module?
If it is, How easy is it to swap in on the side of the road?
Should I do it beforehand?
Also, what are other blokes and ladies doing as an ignition upgrade as these old Italian mistresses age?
What other spares should I carry? I have hoses/fuel line, plugs, fuel pump,etc. wondering about coil, rotor etc.
Car is 1/85, 2.5L
Any help much appreciated; thanks in advance!!

[CraigGTV6]

Thanks, Sportiva, that sounds like what I want. I can see what's going on there and the best bet would be to have it all done before I leave and it would be a simple removal of the patch cable and plug into the new module. Happy days.
I would need both a male ( for the patch lead ) and a female ( for the loom connection ) connector.
Are these a readily obtainable thing? I mean, is the 7 pin connector a common/universal part?
Anything else I should look at carefully before I leave? I need to be as self sufficient as possible as I don't think the RACV or SA equivalent would be any help, apart from towing...
😊

[CraigGTV6]

Thanks sportiva,
Ordered today!

[Colin Edwards]

If not already done, replace ALL ignition leads, replace distributor cap and replace distributor rotor.

A multimeter with fresh quality batteries, full set of fuses, assorted bits of wire, crimp lugs, crimpers, heat sink paste, and insulation tape.

[martym00se72]

Do we qualify for the Bay to Birdwood now? I have an '83 and thought that was too 'young' for it...